Application industry

Product

Function

Grades Used in Decreasing Order of Price

Rubber products / Tyres / tubes / footwear etc

EVA footwear / Raxeen / Leathercloth / upholstery

Precipitated silica

China clay

Aluminium silicate

Zinc stearate

Talc / Barytes

ADC ( azodica-

rbonamide ) blowing or foaming agent

ZINC OXIDE ACTIVE

As a reinforcing agent to increase the strength

As a non – reinforcing  filler to decrease the cost

As a semi-reinforcing filler to increase strength ( less than silica ) and make production faster due to faster curing rate

As a lubricant and curative in EVA products and as a anti-tack and mould release agent in natural rubber

As fillers to reduce cost

In EVA footwear to give sponge effect

In raxeens / leathercloth / upholstery etc to give sponge / cushion effect by releasing gas during processing which gets trapped in the polymer creating foam / sponge

As an activator for rubber vulcanization/curing Tranparent rubber

NK-3/NK-2/NK-5/NK-70                           

Tulsi052/3star/2star

NK-20HS / Super Special (12.5 Kgs) /Commercial super(20Kgs) / General grade(25Kgs).

DLI / LM / MFLOW10 / MFLOW20

Talc5SSW / 5SW,

Barytes 1^st grade/ Off colour.

F2 for Eva & PVC.

AC 5145/ AC 5200

& NC 7500 for Foam Board. AC and NC are used in combination.

T-150 / AH90 / RT70 / RT2 / RT4

Paints

Levigated china clay / kaolin

Talc / Barytes / Calcite / Dolomite

Calcined clay

Aluminium Silicate/ sodium aluminium silicate

Zinc stearate

Aluminium Stearate

Calcium Stearate

Precipitated Silica

As a white filler to reduce cost, our TUSLI range of clays is the whitest clay / kaolin worldwide

As fillers to reduce cost

We produce very finely ground minerals with controlled particle size

As a partial substitute of costly white pigment titanium dioxide

As a partial substitute of costly white pigment titanium dioxide. However this product gives better whiteness than calcined clay and also matting effect additionally

As a thickener / body filler in “ sanding sealers “ which are special type of putty made for providing finish to wooden furniture etc.

To provide anti-settling properties in solvent based paints so that fillers do not settle down at the bottom of the container during storage

To provide water repellance to cement paints

As a matting agent to reduce the gloss

Tulsi 053 / Tulsi 052/ 3Star / 2Star.

Talc 5SSW /5SW

Calcite-Microcal WPS

Dolomite-Microcal ECO

Tulsi 069HT

Tulsi 555.

NK-20HS ( can replace 30 % approx in matt emulsion paints )

DLI-SS

DLI-SS15

MFLOW 30 SS

MFLOW 50 SS

Super (P)

General (G)

High Alumina (T).

Cast- D

CS-MFLOW-30

CS-MFLOW 50.

NK-370 HS / NK- 3HS.

Plastics ( filler masterbatches, colour masterbatches, compounds, plastisols etc), fittings, film, sheets, engineering plastics etc

PVC pipes  rigid / unplasticized type / cables etc

Zinc stearate

Calcium stearate

Talc

Calcite/ dolomite / clay

Precipitated silica

Calcium zinc non toxic stabilizer

Aluminium stearate

Magnesium stearate

Barium Stearate

TBLS

DBLS

LS

One packs

PE Wax

EBS / amide wax

In plastic compounds as a lubricant, dispersing agent and release agent ( non PVC )

In PVC plastic compounds as a lubricant

In big resin manufacturing petrochemical plants making HDPE / LDPE / PVC etc as a acid scavenger and lubricant

As a filler in transparent PP compounds to reduce cost.

In different types of compounds as fillers to reduce cost

As a matting agent, anti-sticking agent and strength improver

For heat stability in processing of compounds made for cable and pipe industry etc

Used as a lubricant in polyamide / nylon compounding

Used in ABS / PS and Polyamide compoundings

Used as a stabilizer in transparent compounds and for scratch resistance in PVC compounds

Tribasic lead sulphate

Dibasic lead stearate

Lead stearate

Above are used as heat stabilizers while processing of

PVC items so that they do not get burnt / degraded due to high temperatures used in processing

These are combinations of above and other additives such as anti-oxidants all put together in one product which provides ease of handling , function is same as above, to provide heat stability to PVC

Flakes used in rigid PVC pipes with excellent results

Used as a lubricant / release agent / anti slip agent in masterbatches and other engineering plastics

Used as a high temperature lubricant and release agent in engineering plastics

DLI / LM / MFLOW10/20/30

For Petro DLI – TS / DLI

For compounding – DLI / D/ MFLOW 10/20/30.

Talc 5SSW / 5SW

Calcite – WPS

Dolomite – ECO

Clay – 053 / 052

NK-3HS/NK-30ABL

Cable.

For 70 to 90  degree C – CZ-835

For 90 to 105 degree C – CZ-55

For 105 to 125 degree C- CZ-75

For Pipe : CZ-RP-40

For Transparent & higher stability –CZ-TRP-1

Other grades available on request.

Aluminium Stearate P/G/T

TCH / ECO

Barium Stearate.

TBLS / TBLS – A

DBLS ( 1st and 2nd grade )

LS ( 1st and 2nd grade )

Powders: PP – 4/3/2/1.

Flakes: LPF 4NI/ 35NI/ 318R/ 15AG/ 15/ 8

PE-7

EBS

Cosmetics/ Toothpaste

levigated clay / kaolin / talc

Zinc stearate

Precipitated silica

Sodium stearate

As a filler to reduce cost in face packs, ointments, compacts, lipsticks, talcum powder etc

As a filler / lubricant / water repellent / anti fungal  in talcum powder

As a free flow provider in talcum powder and other powder cosmetics. As a thickener and polishing agent in tooth paste

In gels of all kinds used as base in cosmetics formulations

Clay : Tulsi 061 /060 /053 /052

Talc :  5SSW /5SW

DLI / LM

NK-3HS

NK-4HS

Powder & Granules.

NS

Detergents

Precipitated Silica

Levigated clay / talcum / calcite / dolomite

As a free flowing and anti-caking agent , it is used in premium grade detergents which have high content of liquid acid slurry , silica absorbs that and prevents cake formation and coats the detergent particles and keeps it free flowing. Our UNISIL NK-7 having 500 % absorption capacity is double than any other silica and we are the only mfrs of this product in the world

As a filler to reduce cost

NK-7

NK 4HS

NK 1

NK70

NK50

3-Star / 2-Star.

Pharma

Levigated clay / kaolin

Magnesium stearate

As an essential part of anti-diarroheal preparation

Used as a lubricant and mould release in tabletting

Tulsi- 077 / Tulsi-053

Magnesium Stearate TCH/ECO

Pesticides

Precipitated silica

Hydrated calcium silicate

Levigated clay / kaolin

As a carrying agent to absorb the liquid medicine in the pesticide and convert it to powder form

Same as above but it has alkaline pH

As a filler to reduce cost. Our tusli grade being very pure chemically does not react with the medicine which is very costly and gives very good shelf life / storage life

NK-7 / NK4HS / NK-1 / NK-70.

HCS

Tulsi 052 /051/ 050/ 5-Star acidic/ 3-Star/ 2-Star.

Chemicals

Precipitated silica

China clay / talc etc

To absorb the liquids and give free flow to any kind of powder preparation

To convert liquid to powder like certain anti-oxidants used in rubber

As fillers to reduce cost

NK-7 / NK4HS / NK-1 / NK-70

NK7

HCS

NK-4HS

Clay – Tulsi 052/ 051/ 050/ 5-Star acidic/ 3-Star/ 2-Star

Talc – 5SSW /5SW

Table salt

Precipitated silica

Added 0.2 % -0.5 % to give free flow effect

NK – 7

NK – 4HS

Construction chemicals

Zinc stearate, calcium stearate, aluminium stearate , other stearates

As constituents in construction chemicals for imparting water proofing effect or for enhanced flow/ lubrication of concerete

As dispersions to increase flowability of RMC

Zinc Stearates – MFLOW-30-SS

Calcium Stearates – MFLOW-30 /

MFLOW-50.

Aluminium Stearate - T